Peruzzo TB100C Drum Type Wood Chipper, Tracked: Self-Powered, Chips 4" Dia x 12" Wide!

Peruzzo TB100C, Self Feeding, Self-Powered, Self-Propelled, Tracked Wood Chipper with "Drum Style Rotor"!

• Peruzzo's Drum Type Chippers Offer Superior Performance & Results, and Less Maintenance than Rotor/Disc Style Chippers.
• Watch the Embedded Video & Observe the Swift Self-Feeding System, the Stable Holding of Branches as they Pass Thru the Hopper, The Stable Condition of the Chipper Itself, and the Smaller & Uniform Size of the Chips.
• Unlike the Rotor/Disc Style Chippers, this Peruzzo Drum Chipper doesn't allow Violent Movement of Limbs & Branches during the Intake/Feeding Process, which creates a potential for Head Knockers, Eye Pokers, etc. - a Tremendous Safety Issue!
• Also unlike the Rotor/Disc Style Chippers, the Chipper is Not Vibrating, or Bouncing Around, which leads to Premature Wear & Tear on the Chipper, & also introduces another Safety Hazard.
• With the 4" Tall x 12" Ultra-Wide Throat Opening enabling the Worst, most Serpentine & Clumsy Pieces to be Fed, Chainsaw Work is reduced, and Clogging is minimized.
• This Large Throat Opening accommodates Chipping Dimensional Lumber, Cane Type Plants & Shrubs, Palm Fronds, Cactus Leaves & Other Vegetation!
• A 12" Wide Throat is the Widest Throat Opening Available for a 4" Chipper. In fact, typically, you'd have to get a 7" Chipper to get a 12" Wide Throat Opening.
• Chipper has 2 Double Sided, Hardened Tool Steel, Presharpened Drum Blades.
• Red Mushroom Push Button Kill Switch on Top of Feed Hopper.
• Tracks are Operated with Forward & Reverse Levers (One on each Handle) & Drive Engage Lever at Left Handle.
• Transmission has 3 Forward & 1 Reverse Speed, with Clutch Free Manual Lever Selection.
• Powder Coated Paint!

• Chipper is Self-Powered with a 18HP, KEY START Vanguard Gas Engine.
• Chipper is Self-Propelled with a 6.5HP Pull Start Vanguard Gas Engine.
• 4" Tall x 12" Wide Throat Opening.
• The Chipper Drum with 2 Embedded Blades Provides the Best Self-Feeding Chipper on the Market!
• Double Sided Drum Blades reduces time required between Sharpening's.
• Drum is 6" X 12" Wide.
• Hopper is 18" Tall x 20" Wide x 42" Deep to Blades.
• With Chipper on the Ground, it's 42" to Bottom of Hopper Feed Shelf.
• As Shown in Photo, it's 65" from Grade to the Tip of Deflector.
• Tracks are 7.25" Wide x 36" Long.
• Outside to Outside of Tracks is 26" - This is Widest Point of Chipper.
• Overall Length of Chipper: 7'.
• Length is from End of Handles to Deflector (folded down).
• Total Weight: 814lb's (Less Pallet/Crating, etc.).
• Cutting Head Weight: 53lb's!
• Specifications are based on manufacturer provided data & subject to change.