Peruzzo TB100 Drum Type PTO Wood Chipper: Chips 4" Dia x 12" Wide!

Peruzzo TB100, Self Feeding, 3-Point Mounted, PTO Powered Wood Chipper with "Drum Style Rotor"!

• Drum Type Chippers Offer Superior Performance & Results & Less Maintenance than Rotor/Disc Style Chippers.
• Watch the Video & Observe the Swift Self-Feeding System, the Stable Holding of Branches as They Pass Thru the Hopper, The Stable Condition of the Chipper Itself & Smaller, Uniform Size of the Chips.
• Unlike the Rotor/Disc Style Chippers, this Peruzzo Drum Chipper Does Not Allow Violent Movement of Limbs & Branches during the Intake/Feeding Process, which creates a potential for Head Knockers, Eye Pokers, etc. - a Tremendous Safety Issue!
• Also unlike the Rotor/Disc Style Chippers, the Chipper is Not Vibrating, or Bouncing around, which leads to Premature Wear & Tear on the Chipper & also introduces another Safety Hazard.
• With the 4" Tall x 12" Ultra-Wide Throat Opening Enabling the Worst, Most Serpentine & Clumsy Pieces to be Fed, Chainsaw Work is Reduced, and Clogging is Minimized.
• This Large Throat Opening Accommodates Chipping Dimensional Lumber, Cane Type Plants & Shrubs, Palm Fronds, Cactus Leaves & Other Vegetation!
• A 12" Wide Throat is the Widest Throat Opening Available for 4" Chippers. In Fact, Typically, You'd Have to get a 7" Chipper for a 12" Wide Throat Opening.
• Chipper Has 2 Double Sided, Hardened Tool Steel, Presharpened Drum Blades.
• Powder Coated Paint!
• Chipper is Shown Mounted on a Tractor for Reference Only - Tractor Is Not Included.
• Chipper Ships Assembled & Includes a Shear Bolt Protected 540RPM PTO Shaft.

• Suitable for Category 1, 3-Point Hitches.
• Recommended Tractor HP Range is 18 to 50HP.
• 4" Tall x 12" Wide Throat Opening.
• The Chipper Drum with 2 Embedded Blades Provides the Best Self-Feeding Chipper on the Market!
• Double Sided Drum Blades Reduces Time Required Between Sharpening's.
• Drum is 6" X 12" Wide.
• Hopper is 18" Tall x 20" Wide x 42" Deep (to Blades).
• With Chipper on the Ground, it's 27" to Bottom of Hopper Feed Shelf.
• As Shown in Photo, it's 51" from Grade to the Tip of Deflector.
• Total Weight: 413lb's (Less PTO Shaft, Pallet/Crating, etc.).
• Cutting Head Weight: 53lb's!
• Specifications are based on manufacturer provided data & subject to change.